Table of Contents
Advertisement
RIDING A STROMER
Power button
The power button is located at the bottom of the
top tube, below the touch screen.
The power button has the following functions:
• Waking up from sleeping mode
• Change from shortcut display to riding display
• Change from riding display to shortcut display
• Change from any point in the menu to the
shortcut display
Switching on
Press the power button to switch on.
When your Stromer has been locked with a
PIN, you must unlock your Stromer after switch-
ing it on before you can use it. (See "Theft protec-
tion" chapter)
16 17
Switching off
1. Press the Power button to get to the shortcut
display.
2. Select OFF.
Sleep mode
When the Stromer is not switched off, it will
switch to sleep mode after approx. 5 minutes of
inactivity. The sensor system remains active dur-
ing sleep mode. The system wakes up by itself as
soon as you move the Stromer.
Alternatively, you can also wake up your Stromer
by using the power button.
Always switch off your Stromer by using the
touch screen when you want to prevent it from
switching itself on.
OPERATING ELEMENT
Important functions of the Stromer can be con-
trolled while riding and without taking your hands
off the handlebar, by using the operating element
on the handlebar.
Light button
Plus button
Minus button
Support levels
The + and – buttons of the operating element
on the handlebar make it possible to change be-
tween the following support modes:
Bicycle mode: The motor is switched off.
Support mode 1: Low motor support, optimized
for large driving range.
Support mode 2: Medium motor support – this
support mode can be fine-tuned by using the
Stromer app.
Support mode 3: High motor support for maxi-
mum speed.
The motor support depends on the force that acts
on the pedals. The more firmly you step onto the
pedals, the stronger the support from the motor.
The motor support stops when you stop pushing
the pedals during the ride. Motor support is only
reactivated when you start working the pedals.
Lighting system
A daytime running light is integrated into your
Stromer to increase safety in daily traffic.
To switch between dipped beam and full beam,
press the light button on the control element on
the handlebar. Your Stromer is equipped with a
lighting system that provides both dipped beam
Hide quick links:
Advertisement
Table of Contents
