Braking Mode / Recuperation; Electronic Bike Horn; Touchscreen - Stromer ST3 User Manual

and full beam light. Just like with cars, a brake
light is integrated into the rear light.
In some countries, the daytime running light can
not be turned off.

Braking mode / Recuperation

Stromer S-Pedelecs can also generate energy
with their motor and thus charge the battery, for
example, when driving downhill. In this case the
motor acts like a dynamo, i.e. it performs a brak-
ing function and thus generates the power that
charges the battery. This may significantly extend
the driving range for a tour. Recuperation can fur-
ther be used as a convenient "engine brake" on
steep or long declines.
As soon as you brake, the motor switches to recuper-
ation/brake mode and supports your braking effort.
The braking energy is stored in your battery and
therefore increases the driving range of your
Stromer.
The Stromer offers a braking aid for prolonged
downhill drives. To use this, keep the minus-
button pressed for 2 seconds. The braking force of
your Stromer can now be adjusted by again press-
ing the plus or minus button.
To terminate recuperation, again keep the + or –
button pressed for another 2 seconds.
A weak recuperation level brakes less and is
therefore suitable for flat declines, while strong
recuperation levels brake significantly more. The
range is therefore easily and conveniently opti-
mized.
The recuperation is automatically terminated
when the speed falls below a certain minimum
and you step onto the pedals. This speed varies
according to the version of the firmware loaded. It
is usually below 10 km/h.

Electronic bike horn

Your Stromer is equipped with an electronic bike
horn. The control button is located on the left han-
dlebar grip. Only use the horn to call attention to
yourself in potentially dangerous situations.
TOUCHSCREEN / DISPLAY

Touchscreen

The display of the Stromer is equipped with a re-
sistive touch screen.
That means that the touch screen does not re-
spond to touch, like capacitive touch screens, but
responds to gentle finger pressure and can there-
fore easily be operated with gloves. Gentle pres-
sure on the touch screen is sufficient to navigate
through various menus or change to the riding
display.
Riding display
The touchscreen changes to the driving display as
soon as you start riding your Stromer.
The riding display shows your speed and informa-
tion regarding the ride. You can change between
riding displays by pressing the touch screen until
the desired information is being displayed.
Theft protection
Activate lock
The Stromer offers optimal theft protection. You
can lock the Stromer with a PIN when you switch
it off. The Stromer can then only be switched on
by re-entering your PIN.
1. Press the Power button to get to the shortcut
display.
2. Select LOCK.
The theft mode is activated when the locked
Stromer is moved.
The Stromer can in this case only be returned from
theft mode by using the Stromer OMNI App. This
makes the Stromer very unattractive for thieves.
Your Stromer automatically switches off when it