Remove Existing Interface Board/Placeholders From The Projector; Barco Projector Placement - GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK User & Installation Manual

2.INSTALLING SR-1000 INTO THE PROJECTOR
2.1. Remove existing interface board/placeholders from the
projector
Before installing the SR-1000, check the figures below to ensure proper placement.
2.1.1.

Barco Projector Placement

Figure 3 shows an interface board (with SMPTE 292 inputs) connected to a Barco projector. This
board must be removed in order to install the SR-1000.
Figure 3 Remove interface board from Barco projector.
Figure 4 SR-1000 Placement on Barco projector.
Installation Manual for SR-1000 Standalone Integrated Media Block™
- 9 -
March 15, 2018