10. CONTENT INGEST MANAGEMENT SETUP
9.2. Content ingest from FTP
Follow the steps below to setup content ingestion from an FTP server:
1. Under the Content tab in the menu, click the Source subtab.
2. On the left column, click Create button.
3. Select FTP as the source type. Enter the FTP name, in this case, we use 'FTP192'.
4. Enter the respective parameters for IP Address, Port, Source Path, Username,
Password.
5. Click Save to save the setting.
6. Click Open to connect to the FTP server and choose the content for ingest.
Installation Manual for SR-1000 Standalone Integrated Media Block™
Figure 29 Content source setting
Figure 30 Content source setting
- 27 -
March 15, 2018