GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK User & Installation Manual page 14

3.CONNECTING PORTABLE STORAGE/ENTERPRISE STORAGE WITH THE SR-1000
1. Take out the power cord from the packaging and connect to the power connector of
Enterprise Storage.
2. Connect the eSATA cable to the back panel of the Enterprise Storage for data transfer.
Making the connections to the SR-1000
3. Insert the eSATA cable into the SR-1000 eSATA port.
NOTE: To use the Enterprise Storage as the content source, it MUST be connected to the eSATA port of
the SR-1000 board.
Installation Manual for SR-1000 Standalone Integrated Media Block™
Figure 10 Connect eSATA cable to the Enterprise Storage.
Figure 11 Insert eSATA cable into SR-1000 eSATA port.
- 13 -
March 15, 2018