Ltech EX1S Manual page 2

DMX Wiring: RF Wireless Wiring:
Multi-control Wiring:
*
After touch panel A realizes controlling the lamps, if B and
C are matched up with A , they can also control the lamps.
*
Connecting touch panel with DMX decoders can also realize
multi-control function.
Match/Clear Code between Touch Panel & Receiver
Match code:
Method 1： When the touch panel is on and the wiring between the receiver and the lamps are correct.
1. 2.
3.
Receiver
Touch the slider in 5s, the
Power on the receiver, and Long press on the touch
lamps stop flicking, match
complete step 2 within 10s. panel, the lamps flicker.
successfully.
Method 2： When the touch panel is on and the wiring between the receiver and the lamps are correct.
2.
1. 3.
Receiver
ID learning button
Touch the slider in 5s, the
Long press on the touch
Short press "ID learning lamps stop flicking, match
button" on the receiver. panel, the lamps flicker. successfully.
Clear code:
Method 1: Power on and off the receiver continuously for 5 times,
If the buzzer long beep and lamps flicker twice, deactivate
the matching successfully. Receiver
Method 2: Long press "ID learning button" on receiver for 5 seconds,
If the lamps flicker twice, deactivate the matching
Receiver
successfully.
ID learning button
Match/Clear Code between Touch Panels:
Match code:
1. 2. 3.
Touch the slider on A in 5s,
Long press on B, the
Assuming that B match up when the indicator lights of
indicator lights of all keys
with A. B turn off, match successfully.
keep on after release.
Clear code:
Long press the two keys on the touch panel B
simultaneously (about 3 seconds) until the indicator light
flicker several times, deactivate the matching successfully.
Match/Clear Code between Touch Panel & Remote:
Match code: Clear code:
1. 2.
Long press the two keys on
Long press on the touch Long press on the remote,
the touch panel simultaneously
panel, the indicator light of the indicator light stop (about 3 second), if the indicator
all keys flicker. flicking, match successfully.
light flicker 3 times, deactivate.
www.ltech-led.com Update Time: 2016.06.27