Scaling The 4 To 20 Ma Analog Output (Aout) - Siemens SITRANS RD200 Operating Instructions Manual

Scaling the 4 to 20 mA analog output (Aout)

The 4 to 20 mA analog output can be scaled to provide a 4 to 20 mA signal for any display
range selected.
No equipment is needed to scale the analog output; simply program the display values to
the corresponding mA output signal.
The Analog Output menu is used to program 4 to 20 mA output based on display values.
Scale output based on display values
1. Press Menu
2. Press Ent/Ack
3. Press Up arrow
scal
accept.
4. Press Ent/Ack
5. Press Enter/Ack
6. Press Up arrow
digit.
7. Press Enter/Ack
8. Press Enter/Ack
9. Press Up arrow
digit.
10. Press Enter/Ack
11. Press Enter/Ack
exit and return to Run Mode.
For instructions on how to program numeric values see "Setting numeric
Note:
values" on page 20.
The Analog Output menu is also used to program the Sensor break value in mA.
7ML19985JS01
to enter Program Mode.
inPt
to accept.
Aout
until the
is displayed.
to access the scale menu.
to set value for display 1.
to change digit and Right arrow
to accept setting.
to set value for output 1.
to change digit and Right arrow
to accept setting.
to set values for
SITRANS RD200 – OPERATING INSTRUCTIONS
SEtu
is displayed.
is displayed.
menu is displayed. Press Ent/Ack
diS1
is displayed.
out1
is displayed.
diS2
is displayed.
diS2 out2
and , or press Menu
to
to change active
to change active
to
Page 33