Sitrans Rd Software; Meter Copy Function (Copy) - Siemens SITRANS RD200 Operating Instructions Manual

SITRANS RD Software

SITRANS RD software allows the SITRANS RD200 to be programmed from a PC and to
act as a data logger.
The software allows all setup parameters to be saved to a file for reporting, restoring, or
programming other meters.
PDC protocol must be selected to communicate with SITRANS RD Software.
Note:
See SITRANS RD Software Instruction Manual for more details.

Meter copy function (CoPY)

The Copy function (
other meters requiring exactly the same setup and programming (such as, type of input,
scaling, decimal point, filter, bypass, etc.).
Copy function requirements
To successfully copy settings from one meter to another, both meters
must have:
• Same software version
• Same baud rate setting
• PDC protocol selected
Determining software version on page 51
See
7ML19985JS01
CoPy
) is used to copy (or clone) all the settings from one meter to
Meter Copy Connection
cable assembly
master
SITRANS RD200 – OPERATING INSTRUCTIONS
clone
for instructions.
Page 47