Brightness / Contrast; Colour Temperature; Frequency / Phase; Status - Siemens SCD 1597 Operating Instructions Manual

3.2.1.

Brightness / Contrast

The picture brightness (not backlight) and the contrast are adjusted here.
3.2.2.

Colour Temperature

Four different colour temperature values are available here (9500K, 8500K, 6500K, 5000K).
The desired temperature is selected by pressing the SUB menu key. Pressing the "UP" key
calls up a sub menu where the selected colour temperature value can be adjusted. There are
three adjustment elements for the three colours, allowing the desired colour temperature or
colour tone, to be set.
3.2.3.

Frequency / Phase

The frequency setting allows the pixel clock frequency to be adjusted. This will only have to
be adjusted if the automatic alignment was unable to determine the correct pixel clock
frequency.
The phase setting allows slight picture disturbances to be eliminated.
3.2.4.

Status

This displays the current display resolution and the horizontal and vertical frequencies.
3.2.5.

Position

This menu point allows the picture to be shifted in the horizontal and vertical directions.
3.2.6.

Scaling

This contains four sub menu points which influence the manner in which images of greater or
lesser resolution than that of the display are represented.
LCD-Monitor SCD 1597-R/RT/R8S Page 16 / 22
Operating Instructions
DOC-Nr.: B3 0038 D4.DOC