Setup; Front Panel Buttons And Status Led Indicators - Siemens SITRANS RD200 Operating Instructions Manual

Setup

Notes:
• The meter is factory calibrated prior to shipment, for all input types, in
milliamps, volts, and degrees respectively.
• The calibration equipment is certified to NIST standards.
There are no jumpers involved in the setup of the meter. The RTD/TC selector switch,
located between the SIGNAL and SERIAL connectors, must be set accordingly for the
meter to accept RTD or thermocouple inputs. See Connector Labeling diagram on
page 11.
Setup and program the device using the front panel buttons.
After power and signal connections have been completed and verified, apply power to
the meter.
Appendix C - Quick User Interface Reference Guide
See
details.

Front panel buttons and status LED indicators

Button
Symbol
Menu
Right arrow/Reset
Up arrow/Max
Enter/Ack
7ML19985JS01
Description
SITRANS RD200 – OPERATING INSTRUCTIONS
on page 59 for more
LED Status
1 Alarm 1
2 Alarm 2
S Set point indicator
R Reset point indicator
Page 17