Table of Contents
Advertisement
Operation
2.3
Front Panel Buttons and LEDs
2.4
System Setup
Quick Setup Menu
6
Siemens Building Technologies
Fire & Security Products
Camera
Pressing the individual camera buttons will cause the selected camera to display full
(1-9/16)
screen. They are also used to enter passwords.
Sequence
When in the live mode, pressing the Sequence button displays another full live channel
sequentially.
Display
Pressing the Display button toggles between different display formats.
PTZ
Pressing the PTZ button opens a Pan/Tilt/Zoom screen which allows you to control
properly configured cameras.
Freeze
Pressing the Freeze button freezes the current live screen.
Alarm
Pressing the Alarm button resets the DVR's outputs including the internal buzzer during
an alarm, or displays the event log when you are in the live monitoring mode unless
there is an active alarm.
Search
Pressing the Search button displays the Search menu.
Menu
Pressing the Menu button enters the Quick Setup screen.
Enter
Pressing the Enter button selects a highlighted item or completes an entry that you have
made.
Arrow
These buttons are used to navigate through menus and Graphic User Interface (GUI).
Duplex
The Duplex LED is lit when the DVR is operating in the Duplex mode.
Network
The Network LED is lit when the unit is networked either via Ethernet or modem.
Backup
The Backup LED is lit when data is being backed up using the USB port.
REC
Press the REC button to set the DVR so that it is ready to record video
The front panel buttons are used to enter system commands and for programming.
Press
button on the front panel and enter the password (default: 4321) by
MENU
pressing the appropriate combination of Camera number buttons and then the
Enter button. Refer to User's Manual for the setup instructions in detail. The
documentation is located on the CD or in the application folder on the PC hard disk
(C:\SISTORE AX \ ...).
Normal Setup Menu
QSG_SISTORE_AX9_AX16_en.doc
01.2004
Advertisement
Table of Contents
