Shoot Move Shoot; Bulb Ramping - CamRanger User Manual

Shoot Move Shoot
This is a feature used to make moving Lmelapses, by taking mulLple pictures with a specified
amount of incremental movement between each shot. The user inputs the number of shots,
the shot delay between each shot, the direcLon and duraLon of the movement, and has the
opLon to include HDR.
▪ Num Shots: Enter the total number of shots to take
▪ Shot Delay: Enter the number of seconds to delay between each shot
▪ Move Direc0on: Select the direcLon of movement between pictures:up, down,
right, lef, or none.
▪ Move dura0on: Enter the number of milliseconds to move between each shot.
▪ HDR: The HDR sejngs are inpuOed within the CamRanger HDR tab. With HDR
iniLated, at each shot the HDR series will be captured.
Bulb Ramping
Bulb ramping is the process of varying the bulb exposure Lme to adjust the exposure during the
Lmelapse. The user specifies an iniLal duraLon for the bulb, the exposure value change desired
over the course of the Lme lapse, and any max duraLon of bulb shot. If the bulb duraLon would
need to be greater than the max duraLon to achieve the desired EV change, the CamRanger will
automaLcally adjust the ISO and the bulb duraLon appropriately.
© CamRanger – Patent Pending 38