Camranger, Camranger Pt Hub, And Tripod Setup - CamRanger User Manual

• Moun0ng the Motorized Pan Head: The motorized Pan Head may be fastened to a standard
tripod head or to any mounLng device having a standard UNC ¼-20 thread mounLng screw.
(NOTE: the MP-360 must be mounted to an exisLng tripod head)
• Moun0ng the Camera: Fasten the camera securely to the top of the motorized tripod
using the mounLng screw, which is a standard UNC ¼-20 thread. Align the opLcal axis of
the Camera with the long dimension of the Motorized Pan Head body.
• Specifica0ons:
o Power source: 4 AA baOeries or A/C adapter plug (neither included)
o VerLcal Tilt Angle: +/- 15 degrees
o Horizontal Panning Angle: 360 degrees with unlimited rotaLon
(if purchased through CamRanger)
o Maximum Camera weight: 6 lb (2.7 kg)
o Size (LxHxW): 5.75 x 4.5 x 4 inches (145 x 115 x 103 mm)
o Weight (without baOeries: 1.75 lb (800 mg)
• Bubble level: If desired, place the included adhesive bubble level on the top of the
tripod (on end with on/off switch).
CamRanger, CamRanger PT Hub, and Tripod Setup
• Required parts:
o CamRanger*
o CamRanger PT Hub
o Motorized tripod (either the MP-360, Bescor, or Hague)*
o USB cable (included with CamRanger or camera)
o Serial Connector (included with the CamRanger PT Hub)
o USB 2.0 A to B connector (included with CamRanger PT Hub)
© CamRanger – Patent Pending 35