Card Contents; Compare - CamRanger User Manual

Card Contents
The card contents buOon shown above will transfer to a view displaying thumbnails of the
images on the camera's removable media. The app will iniLally load the most recent 20
thumbnails on a scrollable window. To load more thumbnails, scroll to the boOom and more
thumbnails will automaLcally load.
Any number of thumbnails can be selected by pressing a thumbnail. Selected thumbnails will
have a yellow border around them. Afer selecLng thumbnails they may either be deleted or
saved. The "Delete" buOon at the lower lef will first prompt the user to confirm, and then
delete the associated images of the selected thumbnails from the camera's removable media.
The "Save" buOon at the lower right will save all associated images of the selected thumbnails
to the user's iOS photo library. Images are saved regardless of format.
Basic filtering by image format is available through the filter buOon found on the lower lef
corner. The filter buOon indicates the format of images being displayed: JPG, RAW, or all. This
buOon can be selected to change the format filtering.
Note: The thumbnails are presented in chronological order beginning with the most recent.
However, for Nikon they are grouped first by format, such that all JPG's will be listed, then TIFF's,
and finally RAW images.
Assuming the user has a GPS enabled iOS device and has granted locaLon privileges to the
CamRanger app, the app records GPS posiLons in order to tag images saved to the iOS device.
When an image is downloaded, the app aOempts to find a GPS posiLon that corresponds with
the Lme the image was taken. If a posiLon is found, the GPS data is added to the file's EXIF
header. Note: GPS data can only be added to JPG images and the image file on the cameras
removable media is not updated.
Images within the card contents view can also be viewed by double tapping on the image.
Similarly to the main screen image viewer, images can be swiped lef or right to display the
previous or next image respecLvely.

Compare

Comparing mulLple images can be done from within the card contents view or the special
"Compare" buOon visible when in Client mode. The "Compare" buOon is located on the right
side of the boOom toolbar and will become acLve when between 2 and 4 images are selected.
SelecLng the "Compare" buOon will show these 2 to 4 images all on the same screen.
© CamRanger – Patent Pending 27