Camranger Pt Hub And Tripod; Camranger Pt Hub Hardware; Mp-360 Tripod Head Hardware - CamRanger User Manual

CamRanger PT Hub and Tripod
• To use the CamRanger PT Hub and Motorized tripod, a CamRanger is required.
• The CamRanger PT Hub and MP-360 (MP 101, Bescor, or
Hague) will only work with CamRanger firmware 6 and up and
the CamRanger app 2.0 and up. Refer to the Firmware
Update secLon of this document for further details about the
firmware update.
CamRanger user manual), the CamRanger PT Hub does
not require registraLon.
CamRanger PT Hub Hardware
• The CamRanger PT Hub is powered by the CamRanger.
USB 2.0 A-end port (USB
2.0 A to B connector
included with CamRanger
Hub)
MP-360 Tripod Head Hardware
• Install BaQeries: Open the baOery compartment by sliding the cover downward and lifing it
outward, insert the 4 AA baOeries in the same posiLon as the markings inside the baOery
compartment.
© CamRanger – Patent Pending
The CamRanger must be registered (see
Serial Connector port
(Cable included with
Camranger PT Hub)
USB port (USB cable
included with the
CamRanger or Camera)
34