Overlays; Controls - CamRanger User Manual

▪ Camera: Allows the camera to be physically used as normal; however, not
• Network SeDngs: The network sejng allows the user to be connected to the
CamRanger and an addiLonal Internet network simultaneously. Refer to the Network
Bridging secLon of this document, page 31, for further details. Note: CamRanger
firmware version 6 and above is required.

Overlays

• Image Overlay: Overlays an image on top of
both sLll images and live view. When toggled
on, the device's photo library appears to
allow the selecLon of an image to be used as
the overlay. NOTE: When an image is
imported to the device via iTunes, the
transparency is removed and become's
opaque white. This can remedied by emailing
the image to the device and then saving into
the photo library.
• Grid Lines: Overlay a grid over the main
image view (opLons of 3x3 or 4x6)
• Grid Color: Select either gray, white, black, or
red grid line color
• Highlights: Blinks solid red over overexposed
highlights
• Shadows: Blinks solid blue over
underexposed shadows
• Focus Peaking: During live view/movie will
aOempt to outline in red areas in focus. The
accuracy of this is greatly depending on your
scene and camera parameters such as
Aperture and ISO.
• File Name: Displays the images file name at the boOom lef of each image
• Aspect Ra0o: Overlays red lines over the main image view to give the user visual
feedback on common cropping raLos. Note: this informaLon is not saved with the
image.
• Focus Points: Displays focus points when reviewing sLll images. (Canon only)
• Night Mode: Will add a red overlay to the app screen to assist with night vision.

Controls

• Client Mode: Removes all camera controls from the main display such that camera
sejngs cannot be changed or the camera controlled.
• Auto-View: Three possible sejngs that control automaLcally displaying images:
© CamRanger – Patent Pending
sejngs on the physical camera is not recognized. AddiLonally, images
cannot be physically triggered from the camera.
all properLes will be enabled within CamRanger.
18