Front Cover - Follett Horizon Elite HMF1010RJS Installation Instructions Manual

Install front cover to ice machine.
8.1
Install condensing unit
• Complete installation of condensing unit
or connection to rack system.
• Required rack system capacity at 0 F
(-18 C) evaporator (EPR supplied by
installer).
1010N: 7,700 Btu/hr (1940 kcal/hr)
1410N: 10,000 Btu/hr (2519 kcal/hr)
Consult Operation and Service Manual provided with ice machine for sanitizing instructions.
DROP-IN • RIDE Technology
NOTICE
Ice machine MUST be sanitized prior to operation!
remote condensing
8.2
Install ice machine front cover
➋
• Slide ice machine cover over machine
ensuring that tabs on back of cover
slip under louvers on back of louvered
docking assembly ➊
• Insert and tighten two screws through
cover and into louvered docking assembly
➋
8

Front cover

➊
13