Table of Contents
Advertisement
LANCOM L-54g Wireless - LANCOM L-54ag Wireless - LANCOM L-54 dual Wireless
Chapter 3: Basic configuration
3.3
Instructions for WEBconfig
Device settings can be configured from any Web browser. WEBconfig configu-
ration software is an integral component of the LANCOM. A Web browser is
all that is required to access WEBconfig. WEBconfig offers similar Setup
Wizards to LANconfig and hence provides the perfect conditions for easy con-
figuration of the LANCOM – although, unlike LANconfig, it runs under any
operating system with a Web browser.
Secure with HTTPS
WEBconfig offers secure (remote) configuration by encrypting the configura-
tion data with HTTPS.
Accessing the device with WEBconfig
To carry out a configuration with WEBconfig, you need to know how to con-
tact the device. Device behavior and accessibility for configuration via a Web
browser depend on whether the DHCP server and DNS server are active in the
30
You also define whether the device can be configured from the local net-
work only, or if remote configuration via WAN (i.e.. from a remote net-
work) is to be permitted.
Be aware that releasing this option also allows remote configuration
over the Internet. Whichever option you select, make sure that confi-
guration access is password protected.
Enter the wireless parameters. Set a network name (SSID) and a radio
channel. If preferred, activate the "closed network" function. Accept your
entries with Next.
Charge protection is a function which can place a limit on the costs from
WAN connections. Accept your entries with Next.
Close the configuration with Finish.
See the section 'TCP/IP settings for PC workstations' for information
on the settings that are required for computers in the LAN.
https://<IP address or device name>
Always use the latest version of your browser to ensure maximum
security.
Advertisement
Table of Contents
