Advertisement
2. ADJUSTING MOUNT
Vertical Mount Adjustment
E
Vertical adjustment is incrementally made by using the holes spaced
2" on the vertical mounting extrusions. If both vertical and horizontal
adjustments are need please read both 2E thru 2I prior to making
adjustments. Fastening points are shared.
Loosen Mount Plate and slide left or right to gain access to the fasteners
of the horizontal mounting extrusions.
Loosen bolts fastening the horizontal mounting extrusions to vertical
mounting extrusions. The flat nuts at the back of the vertical mounting
extrusions will drop and need to be repositioned.
Salamander 3 Bay AV Credenza with Single Display Mount
SLIDE
If vertical adjustment are necessary
reposition the horizontal mounting
extrusions with the fasteners in place
and refasten to the vertical mounting
extrusions. Level the wall bracket
while retightening move to step 2F if
horizontal adjustments are needed.
503-234 [5.17]
page 7 of 17
Advertisement
