Advertisement
SYNERGY 345
Quad Assembly
Includes:
(1) Quad 30 Baseunit
(4) Side Panels
(4) Rear Panels
(2) S20 Doors
(2) S30 Doors
(6) Adjustable Shelves
(1) Double Width Shelf
Limited Warranty
For five full years Salamander Designs Ltd will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or
destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and packing
material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the owner. Warranty repairs will be returned prepaid, via UPS within the continental U.S.A. only.
Salamander Designs Ltd. 800-535-5659 • www.SalamanderDesigns.com
BEFORE YOU BEGIN:
!
!
• Unpack all parts before beginning and refer to the drawing below.
• Shelf pegs and door hinges must slide into the channels of the post in the correct order.
They cannot be removed individually without disassembling the whole unit.
©2012 Salamander Designs Ltd. ® Synergy System, Patented.
Doc No. 501-092/v6.18
345 - 1 of 4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Salamander SYNERGY 345 Quad
Summary of Contents for Salamander SYNERGY 345 Quad
- Page 1 Limited Warranty For five full years Salamander Designs Ltd will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, in the original carton and packing material.
- Page 2 Connect Posts to Bottom Shelf Add Shelf Pegs & Door Hinges WARNING: Tighten by screwing the leveler foot NOT the post. Group Shelf Pegs There are two varieties of shelf pegs (A and B). They are designed to cradle the shelf in place. Refer to drawing.
- Page 3 Attach Doors Note: The hinge can be separated by pulling the black tab and pulling apart the hinge from the Attach Hinges to Door Frames hinge base. Separated hinges snap back together. Insert the hinges into the corresponding holes on the doors.
- Page 4 Attach Rear Panels Final Assembly Placing & Adjusting Shelves Insert Hardware Place shelves from the bottom up. Angle the Combine the 1” threaded studs with the flat nuts. shelf in between the front post and set on top Slide 2 sets of hardware down the two outside of shelf pegs.
Need help?
Do you have a question about the SYNERGY 345 Quad and is the answer not in the manual?
Questions and answers