Salamander 3 BAY AV CREDENZA Assembly Instructions Manual page 6

2. ADJUSTING MOUNT
Determine Current Vertical Position of Mount -
C
of screen to floor dimension for the current position of the mount.
Measure from the floor or top of cabinet to the current center of the Mount Plate
installed and subtract the vertical dimension determined in step 2A. The difference is
the amount of adjustment required.
D
Determine Current Horizontal Position of Mount
Measure from the center line of the cabinet to the center of the Mount Plate and
subtract the horizontal dimension determined in step 2B. The difference is the amount
of adjustment required.
Follow steps 2E thru 2I if vertical and/or horizontal adjustments are needed.
C
Salamander 3 Bay AV Credenza with Single Display Mount
This will provide bottom
D
503-234 [5.17] page 6 of 17