Table of Contents
Advertisement
Quick Links
D1/347A ASSEMBLY INSTRUCTIONS
4 BAY Low Profile WALL MOUNT CABINET
TIP HAZARD WARNING!
Cabinet must be affixed to wall. For use to prevent tipping in compliance
with capacity of cabinet specified. Use with heavier equipment may result in
instability or detachment causing tip over resulting
in death or serious injury.
Salamander 4 Bay Low Profile Wall Mount Cabinet
1 of 10
503-248 [5.17]
Advertisement
Table of Contents
Related Manuals for Salamander D1/347A
Summary of Contents for Salamander D1/347A
- Page 1 Cabinet must be affixed to wall. For use to prevent tipping in compliance with capacity of cabinet specified. Use with heavier equipment may result in instability or detachment causing tip over resulting in death or serious injury. Salamander 4 Bay Low Profile Wall Mount Cabinet 1 of 10 503-248 [5.17]...
- Page 2 300-518 1/4-20 x 3/8” Button Head Socket Screw 302-310 10-32 x 5/8” Button Head Socket Screw 300-835 Universal Shelf Peg 301-055 3/8 x 2” Alligator Wall Anchors Salamander 4 Bay Low Profile Wall Mount Cabinet 2 of 10 503-248 [5.17]...
-
Page 3: Tools Included
Do not use attachments not recommended by the manufacturer. • Do not use outdoors • For Commercial Use Only ***** SAVE THESE INSTRUCTIONS ***** Accessories and Spare Parts Please contact Salamander Designs 860.761.9500 or www.salamanderdesigns.com/commercial Salamander 4 Bay Low Profile Wall Mount Cabinet 3 of 10 503-248 [5.17]... -
Page 4: Install Mounting Brackets
TIP HAZARD WARNING! Cabinet MUST be affixed to wall. Loosely mount Bracket (H) using Screw (A), Washer (I) and Drop-In Nut (E) to rear Horizontal Extrusion as shown. Salamander 4 Bay Low Profile Wall Mount Cabinet 4 of 10 503-248 [5.17]... - Page 5 NOTE: Adjustments has been provided in the bracket to mount the cabinet 0-1” of the wall to account for baseboard trim or other obstacles. Salamander 4 Bay Low Profile Wall Mount Cabinet 5 of 10 503-248 [5.17]...
- Page 6 Snap straps at wall by pushing side Move cabinet to wall and attach to side,snapping of straps level with bracket. Insert bolt through Bracket flange of cap. and tighten until snug against wall. Salamander 4 Bay Low Profile Wall Mount Cabinet 6 of 10 503-248 [5.17]...
- Page 7 Use a 3/16” [5mm] drill bit and drill holes 2.5” [64mm] deep. Insert wall anchors (M) into hole. Place cabinet in place and fasten with washers (F) and Lag Bolts (C). Salamander 4 Bay Low Profile Wall Mount Cabinet 7 of 10 503-248 [5.17]...
- Page 8 Brush Seal Holders should stay flush to surface so that ONLY brush is showing. Cabinet Side Peel off tape and install from inside of cabinet by aligning and affixing the brush seal to rear inside panel. Salamander 4 Bay Low Profile Wall Mount Cabinet 8 of 10 503-248 [5.17]...
-
Page 9: Install Shelves
Level shelf by adjusting Assemble loosely as shown. shelf peg positions and tighten screw using hex key. Note: Drop-in nut must make a 1/4 turn in post. Salamander 4 Bay Low Profile Wall Mount Cabinet 9 of 10 503-248 [5.17]... -
Page 10: Adjustment Tips
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter any problem with your Salamander product, let us know. We are here to make it right. 1.860.761.9500 Full warranty including limitations and warranty claim information may be found at www.salamanderdesigns.com/commercial/warranty...