Page 1
Read ALL assembly instructions before beginning. If you have any questions, please contact your installator or Salamander Designs at 800-535-5659. PARTS - Supplied with Armless, Left and Right-End Chairs Hex Nut Hex Wrench...
Page 2
Tactile Transducer Connecting Seats to Arms (End Chair to Straight or Wedge Connector) Align pieces in location, as they will be final assembled. Align front and back bolt holes. Alex - 3/09 page 2 of 5...
Page 3
Remove lower back panel and locate the back bolt hole. Secure connection by inserting bolt through chair and into arm. Alex - 3/09 page 3 of 5...
Page 4
Front Spacer Remove lower back panel and locate the back bolt holes. Secure connection by inserting bolts through chair bases with spacer in between. Fasten with nut. Alex - 3/09 page 4 of 5...
Page 5
LABOR AND SHIPPING CHARGES - Should you be entitled to receive a repair or replacement under this warranty, Salamander will pay the cost of labor, handling and shipping to the consumer for two (2) years from the date of purchase by the original consumer. After that date, the purchaser will be responsible for these costs.