Advertisement
2. ADJUSTING MOUNT
F
Horizontal Mount Adjustment
Relocate the bolt positions on the vertical mounting extrusions to
provide 2" incremental adjustments.
NOTE: The center line of the Display should never be positioned further than the indication shown
2" increments
Re-fasten assembly while re-leveling mount plates.
NOTE: It is important to Display alignment that brackets are level and aligned.
A long straight edge or string can help to measure.
Salamander 3 Bay AV Credenza with Single Display Mount
center line of display
should not exceed
this line (2" from post)
** The Diagram above show the horizontal mounting extrusions
without mount plates for visual clarification **
503-234 [5.17]
page 8 of 17
Advertisement
