Tennant 5200 Operator's Manual page 8

EN ENGLISH
FIG. 12
3. Lower squeegee by releasing squeegee lift lever
from the lock position (Figure 13).
FIG. 13
4. Lower brush head by stepping down firmly on top
brush lift foot pedal and pushing pedal forward
(Figure 14).
FIG. 14
5. Turn machine power on by turning key.
6. Turn vacuum switch to the ''ON" position.
7. Push solution flow lever forward to desired
solution flow. Solution will immediately begin to
flow once lever is activated (Figure 15).
8
Home Find... Go To..
FIG. 15
To adjust the maximum solution flow rate, turn
solution flow adjustment knob down to increase or
up to decrease (Figure 16).
FIG. 16
8. Turn brush switch to the ''ON" position.
ATTENTION: To prevent floor finish damage, DO
NOT leave machine at stand still once brush
begins to spin.
9. Begin scrubbing by pushing machine forward.
Drive model: Slowly twist the drive roll grips
forward to begin scrubbing.
To increase drive speed, press and hold speed
thumb lever and twist roll grips further ahead
(Figure 17).
FIG. 17
5200 (01–02)