Installing Batteries - Korg Wi-Tune WR-01 Owner's Manual

WR-TX (Transmitter)

Installing batteries

Please don't charge an alkaline battery.
Before you install or replace the batteries on
your WR-01 or WR-TX, be sure to turn off
the power to both the transmitter as well as
the tuner. The batteries that are included are
intended to allow you to check functionality
and may have a short life.
If the batteries for the WR-01 or WR-TX are low
on power, the low battery indicator will appear
on the LCD display of the WR-01. Both units
will continue to work for a while, but tuning
may not be accurate. Please replace the
batteries with new ones as soon as possible.
Power LED
[POWER] button
Installing batteries in the WR-01
1. Gently press down and slide the battery
case cover on the rear panel of the WR-01
to remove it.
2. Properly orient the batteries and insert
them into the unit.
3. Reattach the battery cover on the WR-01.
Installing batteries in the WR-TX
CR2032 batteries that are compatible with the
WR-TX
CR2032 batteries made by Panasonic
5