zapco DSP-Z8 IV II Owner's Manual page 17

The Equalizer page
of the App. You can use either the Graphic or the
Paragraphic EQ's. You can link channels for
equalization and from this page you can save a
load presets and files. This special page warrants
a quick look at each of its parts.
The EQ sliders let you adjust each band
1.
between +12dB and -17dB. You can slide the bands
across the screen to display all 31 bands.
2. Status readouts show the current Frequency,
Q factor, and Gain setting of each band.
3. When you activate the paragraphic EQ you can
use the sliders to adjust frequency and Q.
4. CH Buttons let you choose the channel you
wish to adjust.
5. These link button let you link channels together
for equalization. Note that you must turn the links
off manually in the mobile apps.
6. These are the Reset and Bypass buttons in the
mobile apps. Also, on this line is the selector to turn
on the paragraphic equalizer (default is GEQ).
The up/down arrows can be used for fine
7.
adjustments of EQ parameters.
The EQ graph shows what you are doing to
8.
the signal going to the amplifiers.
Open File loads an EQ preset from a file on
9.
your mobile device.
Save File saves the current settings to a file on
10.
the mobile device.
Open Scene loads a preset from a DSP memory
11.
position.
12. Save Scene saves the current settings to a memory
position in the DSP.
13. Multi Curve is a drop-down that lets you
choose to display more curves in the graph along
with the active channel.
holds the heart and the brains
9
3
8
7
2
6
3
4
5