Adsp-Z8 Iv-8 - zapco DSP-Z8 IV II Owner's Manual

6 channels of RCA inputs for the main source
1.
2. 2 channels of RCA inputs for an Auxiliary source
Optical port for digital input
3.
4. Dash remote port
5. USB connector for PC control. The indicator lights when the USB is connected
6. High level OEM input connector
7. On/Off switch for the auto-on function
Switch for high level/low level inputs
8.
9. BT indicator blinks while looking for a Bluetooth device, then goes solid when it is paired
Speaker output connectors for Ch 5~8
10.
11. Speaker output connectors for Ch 1~4 [Note 1: the Left Ch (odd) positive terminal and the
Right Ch (even) negative terminal are used for bridging the speaker outputs. Note 2: the amp is
stable at 2 ohms stereo or 4 ohms mono. The amp should not be run at 2 ohms mono]
Main +12V connector, +12 trigger from head unit when the Auto-on is turned off, Main
12.
Ground connector

ADSP-Z8 IV-8

8 1 2 3 4 5 9 6 7