Graphical User Interface (Gui) - zapco DSP-Z8 IV II Owner's Manual

Graphical User Interface (GUI)

From the top left, this GUI is designed to take you smoothly through a system set-up. At the
very top of the GUI there is a FILE button with a drop-down menu. This is where you can
save and Load files and memory presets. See System Setup for more on the file button.
1 2
8
First you will choose an
1.
new Digital Bluetooth Streaming. There is also an extra button (now labeled COAX) for future
expansion. For the main input you can choose 2Ch, 4Ch, 6Ch, or OEM MIX. In MIX all the left
channel information and all the right channel information will be summed to a single full
range stereo pair.
2. Next to Inputs a default
channel based on the input you choose. However, you can override the default choices by
simply clicking into the input you want for each output channel.
3. At the Car's Speakers
(actually your head) to each speaker in the system and enter that in the speaker diagram, then
click Delay Calc and the system will figure and install the correct signal delay for each speaker.
3
9
from Main (head unit), Digital SPDIF, Analog AUX, or the
Input
I/O map will send the default input information to each output
diagram, you can enter the distance from your listening position
4
10
5
6
7