zapco DSP-Z8 IV II Owner's Manual page 15

The Channel page serves as the main system
setup page. Like in the PC GUI, the
will open on the locked mode and you need
click to un-lock ( ) before you can set the
1
channel (speaker) functions using the
drop-down menu. The choices here are the
same as with the PC GUI. The in/out
mapping ( ) is set up differently but functions
2
the same. The available channels, depending
on you input selection, will show in the
window. Click and a drop-down will let you
decide the inputs (
lets you set each channel's function.
The channels output level (
slider and the level shows in the window.
The speaker icon ( 5
the channel and you can click the polarity (
to toggle between 0° and 180°.
If the page is unlocked the Default button (
will put all parameters to the default positions.
You can drag the display up to see the hidden
channels and set them. When you set the speaker
functions in the Channels page, the system will
assign default crossovers to protect your valuable
speakers from frequencies that can be dangerous
to them.
When you are finished re-lock the page to prevent accidental entries.
Channel page
) at each channel number
3
) is set by the
4
) for each channel will mute
7
3
5
4
6 )
)
7
1 2 6