The Dsp-Z8 Iv Ii Mobile Apps - zapco DSP-Z8 IV II Owner's Manual

The Zapco DSP-Z8IV II apps for Android and iOS are identical and allow you to setup and tune
your system with your smart phone or tablet. The goal here was to have a control system that
made sense in a smaller platform but would allow the user to do everything necessary for a
complete setup and tine. With the system on, you will see
Not Connected . Choose that BT to connect to the DSP and the indicator will light constant blue.

The DSP-Z8 IV II Mobile Apps

6
3
5
2
4
zapco dsp music BT ####
When you open the ZIV II APP on your smart
device, it will sync to the settings that are in
the active preset in your DSP, so you will always
open the app to the settings you were last
listening to. After the APP Syncs to the DSP, the
Opening page gives you immediate access to
the System Volume (
Volume ( 2 ). A drop-down menu (
active signal source. You can click the source
menu to get all the input choices if you want
to work in a different input source. At the
bottom is the DSP "Mode" (
preset will show. Here you can choose a
different memory preset to start from if you
wish. The speaker icon (
all channels. Advanced Setup (
tuning pages but cannot be opened in
"Demo" mode. You can only enter Setup after
the Smart device is paired to the DSP and has
been sync'd.
) and the Subwoofer
1
3 ) shows the
4 ). The active
5 ) lets you quickly mute
) opens all the
6
and