Remote Control; The Microphone; The Graphical User Interface - zapco DSP-Z8 IV AT Quick Manual

Remote Control

1 2
1. Switch to the previous song (Bluetooth)
2. Switch to the next song (Bluetooth)
3. Mode switching
4. Source switching
The Microphone for Auto Tuning
The M-AT1 is a special microphone for setting up the sound automatically, based on
the response characteristics of the speakers and auto detail detection of the car. After
detecting all the necessary information, the audio information screen will be transmitted
to the computer.
1. Connect the microphone to the dedicated port of the unit.
2. The microphone must be fixed on the headrest of the driving position. This position is
basically the same as the head of the driver.
12
3 4 5
5. Volume knob. Long press for 5 seconds
enter the switching mode between main
volume or subwoofer. Short press the mute
(optional)
The Graphical User Interface (GUI)
Below is the layout of the control program (GUI) for the DSP AT processors.
Please see the full manual at www.zapco.com/download for a full description of the program,
including the Mixing Set and Auto Calibration in the Advanced menu.
1 2 3 4
6 7
1. Main Menu for File (Save and Load files and presets), Advanced (Mixing Set and Auto
Calibration) and Help (Used for updating).
2. Input source selection for Line In, Bluetooth (with optional HD-BT module), and both
Optical and Coaxial digital inputs.
3. Input quick setup. Choose 2Ch, 4Ch, 6h, or 8Ch, w/ SUM if needed.
4. Here you choose the channel you want to work on.
5. System design section for channel function (by drop down menu), crossover, phase,
mute, solo. Here also is channel linking for Crossover, Signal Delay and Output Level
adjustments.
6. EQ Tuning Tools section.
7. EQ and Crossover graph.
8. Output level controls by channel or overall, by MAIN.
5
8
13