Table of Contents
Advertisement
6.9 Mounting Transducers into the MCF (cont.)
See typical completed MCF installations in Figure 13 below.
WARNING! If your fixture is installed at an elevated location, GE recommends securing the fixture with the
optional safety chain or a tether/leash to prevent injury if the fixture falls off the pipe.
WARNING! Before performing the next step make sure power to the flowmeter electronics has been
disconnected.
8. Make the transducer cable connections as described in the flowmeter User's Manual.
C-RS Ultrasonic Flow Transducer Installation Guide
Double-Traverse Installation (Top View)
Single-Traverse Installation (Top View)
Figure 13: Completed MCF Installations with Transducers
41
Advertisement
Table of Contents
