Subscribe to Our Youtube Channel
Related Manuals for GE Baker Hughes Masoneilan 4411
Summary of Contents for GE Baker Hughes Masoneilan 4411
- Page 1 Masoneilan* 4411 Model Electropneumatic Transducer ATEX Instruction Manual (Rev.D) BHGE Data Classification : Public...
- Page 2 © 2019 Baker Hughes, a GE company. All Rights Reserved. b | BHGE...
- Page 3 SPECIFIC REFERENCE INFORMATION IN ADDITION TO THE CUSTOMER/OPERATOR’S NORMAL OPERATION AND MAINTENANCE PROCEDURES. SINCE OPERATION AND MAINTENANCE PHILOSOPHIES VARY, BHGE (BAKER HUGHES, A GE COMPANY AND ITS SUBSIDIARIES AND AFFILIATES) DOES NOT ATTEMPT TO DICTATE SPECIFIC PROCEDURES, BUT TO PROVIDE BASIC LIMITATIONS AND REQUIREMENTS CREATED BY THE TYPE OF EQUIPMENT PROVIDED.
-
Page 4: Table Of Contents
Potentially Explosive Atmospheres — Markings ........................7 Instructions Specific to Hazardous Area Installations ......................8 Instructions — Special Condition for Safe Use ...........................8 FM Control Drawing ....................................9 CSA Control Drawing...................................10 © 2019 Baker Hughes, a GE company. All Rights Reserved. d | BHGE... -
Page 5: Safety Warning
• These instructions are written specifically for the 4411 IP Transducer, and do not apply for other instruments or IP transducers outside of this product line. © 2019 Baker Hughes, a GE company. All Rights Reserved. Masoneilan Model 4411 Electropneumatic Transducer Instruction Manual | 1... -
Page 6: Brief User Guide
WHEN USING JACK PLUG A SIGNAL DOES NOT HAVE TO BE SUPPLIED VIA THE TERMINAL BLOCK. THE INPUT SIGNAL CAN BE MONITORED THROUGH THE JACK PLUG SOCKET WHEN UNIT IS IN OPERATION. Figure 1 © 2019 Baker Hughes, a GE company. All Rights Reserved. 2 | BHGE... -
Page 7: Instrument Mounting
The ports are threaded 1/4" NPT at the back of the unit and 1/8" NPT at the front. © 2019 Baker Hughes, a GE company. All Rights Reserved. Masoneilan Model 4411 Electropneumatic Transducer Instruction Manual | 3... -
Page 8: Electrical Installation
The Jack Plug can be either set-up for Monitoring to explosion-proof specifications must be used. A ground or Calibration/Operation set-up. terminal is provided both internally and externally and should © 2019 Baker Hughes, a GE company. All Rights Reserved. 4 | BHGE... -
Page 9: Tight Shut-Off Adjustment Instructions
Erratic at all Controller cannot Reduce loop pressures provide 6.5V resistance continuously or change controller Contamination Check I/P filter status © 2019 Baker Hughes, a GE company. All Rights Reserved. Masoneilan Model 4411 Electropneumatic Transducer Instruction Manual | 5... -
Page 10: Technical Specifications
1/2" NPT (M20 option); 2 internal screw terminals for 2.5mm cable Weight: 2.07Kg Materials Aluminium and zinc diecasting with nitrile diaphragms, epoxy powder coat painting as standard. Weatherproof to Type 4X (IP66) [mounted upright]. © 2019 Baker Hughes, a GE company. All Rights Reserved. 6 | BHGE... -
Page 11: Potentially Explosive Atmospheres - Markings
For additional warnings that may apply for safe use and installation, refer to the Instructions – Special Conditions for Safe Use section of this manual as identified on ATEX certificates numbers with an ‘X’ suffix. © 2019 Baker Hughes, a GE company. All Rights Reserved. Masoneilan Model 4411 Electropneumatic Transducer Instruction Manual | 7... -
Page 12: Instructions Specific To Hazardous Area Installations
• Aggressive substances: e.g. acidic liquids or gases that may attack metals, or solvents that may affect polymeric materials. © 2019 Baker Hughes, a GE company. All Rights Reserved. 8 | BHGE... -
Page 13: Fm Control Drawing
© 2019 Baker Hughes, a GE company. All Rights Reserved. Masoneilan Model 4411 Electropneumatic Transducer Instruction Manual | 9... -
Page 14: Csa Control Drawing
© 2019 Baker Hughes, a GE company. All Rights Reserved. - Page 15 Notes: © 2019 Baker Hughes, a GE company. All Rights Reserved. Masoneilan Model 4411 Electropneumatic Transducer Instruction Manual | 11...
- Page 16 The BHGE logo is a trademark of Baker Hughes, a GE company LLC. GE and the GE monogram are trademarks of the General Electric Company used under trademark license.
Need help?
Do you have a question about the Baker Hughes Masoneilan 4411 and is the answer not in the manual?
Questions and answers