Connection; Install Tf Card; Connect Crp12X Premium - LAUNCH TECH CRP12X Premium Series User Manual

LAUNCH

4. Connection

4.1 Install TF card

1) Take out the TF card from package box.
2) Insert the TF card into the CRP12X Premium TF card slot perpendicularly.
Make sure is fully inserted in the right place with the "micro" label facing
upward.
Note: You can hear a clicking sound if you insert the TF card in the right place. Press the
card slightly, it will be ejected automatically.

4.2 Connect CRP12X Premium

1. Turn the ignition off.
2. Locate vehicle's DLC socket: It provides standard 16 pins and is generally
located on driver's side, about 12 inches away from the center of dashboard.
See Figure 2-2. If DLC is not equipped under dashboard, a label indicating
its position will be given. In case no DLC is found, please refer to Automobile
Repair Manual.
3. Plug one end of the diagnostic cable into the OBD II 16 pin connector of
CRP12X Premium, and connect the other end to the vehicle's DLC.
CRP12X Premium
4. Turn the ignition on. Engine can be off or running.
5. After finishing, the system will start initializing. After initialization, the system
will enter the main menu interface.
8
CRP12X Premium Series User's Manual
Diagnostic Cable
Figure 4-2
Vehicle