Settings - LAUNCH TECH CRP12X Premium Series User Manual

LAUNCH
CRP12X Premium Series User's Manual
CAUTION: Don't connect or disconnect any test equipment with ignition on or engine
running.

4.3 Settings

Select [Settings] in the main menu and press [OK], the system will enter the
EN
following screen:
Figure 4-2
1) Language
This option enables you to set the user interface language.
Note: Due to continuous software upgrade, language interface may differ from different
software versions.
2) Unit of Measure
This option allows you to set measurement unit.
3) Beeper
It is used to set On/Off the buzzer.
4) Record Mode
It is used to turn On/Off recording function.
9