Installation Warnings; During Use - Belling FSE608D Blk User Manual

1.2 Installation Warnings

• Do not operate the appliance before it is fully installed.
•
The appliance must be installed by an authorised
technician.
any damage that might be caused by incorrect
placement and installation by unauthorised people.
• When the appliance is unpacked, make sure that it
has not been damaged during transportation.
In the case of a defect, do not use the appliance and
contact a qualified service agent immediately. The
materials used for packaging (nylon, staplers,
styrofoam, etc.) may be harmful to children and they
should be collected and removed immediately.
• Protect your appliance from the atmosphere. Do not
expose it to sun, rain, snow, dust or excessive
humidity.
• Materials around the appliance (i.e. cabinets) must be
able to withstand a minimum temperature of 100°C.
• The Product must not be placed on a base, it must be
placed on the floor.
CAUTION: This appliance must not be installed
behind a decorative door in order to avoid
overheating.

1.3 During Use

• When you first use your oven you may notice a slight
smell. This is perfectly normal and is caused by the
insulation materials on the heater elements. We
suggest that, before using your oven for the first time,
you leave it empty and set it at maximum temperature
for 45 minutes. Make sure that the environment in
which the product is installed is well ventilated and all
documentation is removed from inside the oven.
• Take care when opening the oven door during or after
cooking. The hot steam from the oven may cause
burns.
The manufacturer is not responsible for
EN - 6
EN - 7