Advertisement
Piranhs HS-xx Detailed Getting Started Guide
If you do not see the test pattern above, you may see one of the following:
TDI Mode, Forward Internal Direction, Test
Pattern 1 (
tdi 1, scd 0, svm 1
If you see this test pattern, your
framegrabber configuration file does
not match your mirroring mode.
You will need to reconstruct the
pixel readout definitions in your
framegrabber configuration file.
Repeat Part 1 or change the smm
value to match the framegrabber file.
TDI Mode, Reverse Internal Direction, Test
Pattern 1 (
tdi 1, scd 1, svm 1
If you see this test pattern, you are
operating in Reverse Internal
Direction. If you want to operate in
forward direction control, enter the
command scd 0.
TDI Mode, Reverse Internal Direction, Test
Pattern 1(tdi 1, scd 1, svm 1)
If you see this test pattern, your
framegrabber configuration file does
not match your mirroring mode.
You will need to reconstruct the
pixel readout definitions in your
framegrabber configuration file. If
you want to operate in forward
direction control, enter the
command scd 0.
If you cannot see these test patterns, ensure that:
•
•
DALSA Corp.
4k
)
8k
Framegrabber Configuration
Configuration matches smm 1 readout
Configuration matches smm 0 readout
4k
)
8k
Framegrabber Configuration
Configuration matches smm 0 readout
Configuration matches smm 1 readout
4k
8k
Framegrabber Configuration
Configuration matches smm 1 readout
Configuration matches smm 0 readout
Your framegrabber configuration file is correct
You have entered all previous commands correctly. Repeat steps in Part
5 if you are unsure.
Camera Mirror Mode
Direction
smm 0
scd 0
smm 1
Camera Mirror Mode
Direction
smm 0
scd 1
smm 1
Camera Mirror Mode
Direction
smm 0
scd 1
smm 1
03-32-10147-01
14
Advertisement
