Responsibility Of Owners And Users - Presto Lifts Power Stak PPS3000-125AS Installation, Operation And Service Manual

Responsibility of Owners and Users

Inspection and Maintenance
The device shall be inspected and maintained in proper working order in accordance
with Presto's owner's manual.
Removal from Service
Any device not in safe operating condition such as, but not limited to, excessive leakage,
missing rollers, pins, or fasteners, any bent or cracked structural members, cut or frayed
electric, hydraulic, or pneumatic lines, damaged or malfunctioning controls or safety
devices, etc. shall be removed from service until it is repaired to the original manufac-
turer's standards.
Repairs
All repairs shall be made by qualified personnel in conformance with Presto's instructions.
Operators
Only trained personnel and authorized personnel shall be permitted to operate PowerStak.
Before Operation
Before using the device, the operator shall have:
• Read and/or had explained, and understood, the manufacturer's operating instruc-
tions and safety rules.
• Inspected the device for proper operation and condition. Any suspect item shall be
carefully examined and a determination made by a qualified person as to whether it
constitutes a hazard. All items not in conformance with Presto's specification shall
be corrected before further use of the PowerStak.
During Operation
The device shall only be used in accordance with this owner's manual.
• Do not overload.
• Ensure that all safety devices are operational and in place.
Modifications or Alterations
Modifications or alterations to any Presto industrial positioning equipment shall be made
only with written permission from Presto.
Travel speed requirements must be set in the factory prior to shipping. Travel speeds for
this AC Drive System cannot be field adjusted.
PRESTO OWNER'S MANUAL Page 6 POWER STAK