Introduction - Presto Lifts Power Stak PPS3000-125AS Installation, Operation And Service Manual

This manual attempts to provide all of the information necessary for the safe and proper
installation, operation and maintenance of Presto Lifts Inc. battery operated, Power
Stak. It is important that all personnel involved with the installation, maintenance or
operator of the stacker read this manual. Additional manuals are available upon request
or at www.PrestoLifts.com.
Each Presto stacker is equipped with nameplate, serial number and model identifications.
Please refer to these numbers when ordering parts or requesting further information.
The Presto stackers are designed for lifting, lowering and positioning a wide variety of
loads. WHERE UNIQUE SITUATIONS ARISE, WHICH ARE NOT COVERED IN
THIS MANUAL, CALL PRESTO LIFTS FOR FURTHER INSTRUCTIONS.
The battery operated stackers are designed for in-plant/non-hazardous locations only.
They can be used in a 8' or larger aisle. These units are not for personnel lifting.
This machine is designed for powered
travel and should not be manually moved
by applying force to the Control Pod
The Control Pod and steering arm should
only be moved side to side when the
The Control Pod and steering arm should
be lowered to the drive position and power,
Forward or Reverse, is engaged by moving
the thumb wheel in the direction of desired
travel then the steering arm can be moved
side to side for directional steering.
Pushing or pulling on the Control Pod
Handles when the unit is not powered can
PRESTO OWNER'S MANUAL
S E C T I O N 1

INTRODUCTION

Handles
machine is under power
lead to damage and/or breakage
Page 5 POWER STAK