Operation; Changing The Operation Mode; Turning The Line Trimmer On/Off - Redback 106065 Operation Manual

Operation

Clearance cutting
The cutting head is guided parallel to the ground. When
clearance cutting, guide the lawn trimmer in a semi-circle in
front of your body.
3
1
2
Figure 11
Edge cutting
The edge cutting function allows you to trim precisely and
comfortably along the edge of the lawn.
1
Changing the operating mode
1. Press downwards and hold the locking button on the shaft
coupling (see Figure 11). Turn the lower shaft by 90° . The
1 2
arrow on the locking button coincides with the arrow on the
shaft coupling. Release the locking button . Check latching
3
2
by slightly twisting!
Switching the Line Trimmer ON
Figure 12
First press and hold the switch interlock . Then press the On/
1
Off switch (see Figure 12).
2
Switching the Line Trimmer OFF
Release the On/Off switch (see Figure 13).
!
RELEASE ON/
OFF SWITCH TO
STOP
CAUTION
Note that the line continues running for a few seconds
Figure 13
when the lawn trimmer has been switched off.
10