Advertisement
ASSEMBLY &
OPERATION
Warning! Remove the battery
pack before cleaning or maintaining
the tool, fitting the edger wheel or
plant guard or before making any
adjustments to the tool, especially
around the string head.
Remove the battery pack before
transporting or storing the tool.
Fitting the guard
The guard is an essential part of the
tool and must ALWAYS be used.
Otherwise, damage to the trimmer
and injury to the operator may
occur. The guard is not fitted to the
trimmer when it is delivered to you
to avoid damage in transit.
To fit the guard, align the opening in
the guard with the underside of the
trimmer head as shown. Tighten the
four screws (highlighted in the
drawing) to fix the guard in place.
Wheel Assembly
Installation
The edger wheels are needed for
edge trimming, and although they
are not needed for normal
trimming, they can be left fitted to
the machine during normal
trimming operations.
To fit the edger wheel assembly,
slide it downwards onto the grey
plastic track on the left side of the
trimmer head. You will feel it click
into place. You may need to use a
screwdriver to lift the locking tab
before you can slide the assembly
into place
The edger wheel assembly can be
removed by lifting the locking tab
(use a tool if necessary) and sliding
upwards.
8 / 20
Advertisement
