Related Manuals for Redback E312D
Summary of Contents for Redback E312D
- Page 1 40V LITHIUM-ION CORDLESS LINE TRIMMER Model: E312D Operations Manual www.redbacktool.com support@redbacktool.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS the contacts – Explosion and fire • Contents…………..……………1 hazard! • Symbols. ….…………………1-6 • Specifications……..……..…...7 • Assembly & Operation…….8-15 Before using the tool, • Major Trimmer Parts……...…16 read the operating manual. Read all • Exploded Parts List .…..17-19 safety warnings and all instructions including the currently valid site rules and regulations for the prevention of... - Page 3 User unit will exclude the manufacturer from any liability for resulting injury and/or This garden tool is not intended for damage. use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless Preparation they have been given supervision or 1.
- Page 4 During Operation 12. When interrupting work, never 1. Do not switch on the unit if there are leave the unit unattended and keep it in persons (particularly children) or a safe place. animals in the immediate vicinity. For The Battery Charger 2.
- Page 5 power tool or battery-operated 3. Do not expose power tools (cordless) power tool. to rain or wet conditions. Water entering a power tool will Work Area Safety increase the risk of electric shock. 1. Keep work area clean and well lit. Personal Safety Cluttered or dark areas invite accidents.
- Page 6 on. A wrench or a key left attached to 3. Disconnect the plug from the power a rotating part of the power tool may source and/or the battery pack from increase the risk of injury. the power tool before making any 5.
- Page 7 those intended could result in a Have your power tool serviced by a hazardous situation. qualified repair professional using only the identical replacement parts. Battery Tool Use And Care This will ensure that the safety of the 1. Recharge only with the charger power tool is maintained.
-
Page 8: Specifications
PRODUCT SPECIFICATIONS Tool Line Trimmer Model E312D Rated Voltage 40V DC No Load Speed 7500 RPM Motor Type Brush Cutting head Bump feed Cutting Line 1.6mm Nylon Cutting Width 12” Pole Diameter 25mm Handle Type Loop Guaranteed 96 dB(A) sound power level Battery EP20 (2.0Ah) -
Page 9: Assembly & Operation
ASSEMBLY & Wheel Assembly OPERATION Installation Warning! Remove the battery pack before cleaning or maintaining The edger wheels are needed for the tool, fitting the edger wheel or edge trimming, and although they plant guard or before making any are not needed for normal adjustments to the tool, especially trimming, they can be left fitted to around the string head. - Page 10 the battery is securely locked into Fitting the plant guard place The plant guard is used to prevent To remove the battery press and your trimmer from cutting your hold the latch on the rear of the plants. The wire plant guard is battery pack and slide the battery inserted into the holes provided in away from the trimmer.
- Page 11 (0.065”) in diameter maximum 12m Then put the spool and spring into long (you may find it easier to the housing leaving the ends of the practice with a shorter line length at line protruding from the cutouts on first). Find the center of the line and each side.
- Page 12 OPERATION BEFORE OPERATING THIS TOOL, ENSURE THAT THE GUARD IS FITTED TO THE HEAD OF THE MACHINE. NEVER USE THE MACHINE WITHOUT THE GUARD Starting/Stopping the trimmer: Adjusting the line To switch the trimmer on, press and hold the safety switch (1) and then length –...
- Page 13 Height adjustable push handle The auxiliary handle (5) is height adjustable. To move the handle, Setting the handle first release the orange handle clamp on the underside of the length handle. Slide the handle to the desired height and clamp in position Turn the lock sleeve towards the ‘unlock’...
- Page 14 Maintenance, storage, and disposal Disconnect the machine from the battery pack before carrying out maintenance or cleaning work. When not in use store the machine out of the reach of children. Use only manufacturer recommended replacement To use the trimmer in edging mode, parts and accessories.
- Page 15 Inspect and maintain the injury, only use the charger to machine regularly. Have the recharge Redback 40V battery machine repaired only by an packs. Never try to recharge authorized technician. non-rechargeable batteries. The battery must be WARNING: If the charger is...
- Page 16 - The LED will flash green while the battery is charging - Once the battery is fully charged, the LED indicator will show a steady green light. - Remove the battery by pressing and holding the latch button and sliding out of the charger Lithium-Ion batteries have no memory effect –...
-
Page 17: Major Trimmer Parts
MAJOR TRIMMER PARTS 1. Battery 2. Safety switch 3. Trigger switch 4. Trimmer shaft 5. Auxiliary handle 6. Lock sleeve and edging function button 7. Angle adjustment button 8. Edger wheel 9. Guard 10. Plant protector 11. Spindle lock button 16 / 20... -
Page 18: Exploded Parts List
EXPLODED VIEW AND PARTS LIST Part No. Description Part No. Description Locking block Right 20910110 20920030 housing Body cover Right 20910100 20300130 tumbler 20910090 Pipe sleeve 20300120 Left tumbler Adjustment Left housing 60390180 20920020 spring Rotate Adjustment 20470050 60390190 switch spring aluminum Angle adjust... - Page 19 Tapping Self-tapping 60170730 60070120 screw screw Left adjust Wheel hub 20910080 20430160 body right adjust Motor 20910080 30070070 body aluminum Lower cover 71080100 20150080 pipe of gear box 20910050 Locking plate 60070180 Screw 20910060 Rubber box 70670320 Motor wheel Lock rubber protection 20910130 20930030...
- Page 20 30010240 Male tab 60350130 Flat key 20800020 Plug in seat 70030660 Output shaft Self-lock Gear wheel 20470030 70670330 switch Self-lock Spring 60380380 60240230 spring washer Start switch Upper cover 20470040 20150070 of gear box Micro switch Self-tapping 30080030 60170070 screw Start spring Self-tapping 60390170...