System Specification - scope Digilink MK3 Installation & User Manual

Mains Input:
System Operating Voltage:
System Power Consumption:
Transmitter:
Power output:
Frequency Range:
Channel Spacing:
TX Baud Rate:
RF Standards applied:
EMC Standards applied:
FCC ID:
General:
Ports:
Footprint (mm):
excluding aerial
Scope's policy is one of continuous development and specifications are subject to change without prior notice
DLINKMK3ACUSA
Digilink MK3, USA Mains Version

System Specification

100-240V ac 0.8A 50/60 Hz
13.8V dc
less than 700uA (micro Amp) standby, 1.4A transmit
1W max
446-469.700 MHz
12.5KHz
512 or 1200
CFR 47, Part 90 & RSS119
FCC Part 15
JRNUSA1WTX
5 or 10 dry contact/voltage inputs (configurable)
Open Collector (siren) output: 1A max
Relay output for Power Fail indication
USB port for programming function only
328 (L) x 190 (W) x 75 (D) max
11
Issue 1