Problem
is flashing in the
display.
appears
unexpectedly in the
display and the
symbol flashes at the
same time. The buzzer
may also be sounding.
appears in the
display,
A noise can be heard
after a cooking process.
Spots like rust appear
on catalytic surfaces.
Cakes and biscuits are
not sufficiently baked in
the times given in the
chart
Cause and remedy
There has been a power cut.
Reset the time of day (see "Using for the first
time").
Cooking times will also need to be reset.
The oven has been operating for an unusually long
time and this has activated the safety switch-off
function.
Turn the function selector to 0. The oven is now
ready to use again immediately.
There is a problem that you cannot resolve.
Call Miele Service.
The cooling fan will continue to run for a while after
the oven has been switched off to prevent any
humidity building up in the oven, on the control panel
or in the oven housing unit.
This cooling fan will switch itself off automatically
after a certain period of time.
The catalytic cleaning process does not remove
spices, sugar and similar deposits.
Take catalytic panels out of the oven and remove
this type of deposit with a mild solution of hot
water and washing-up liquid applied with a soft
brush (see "Cleaning and care / Cleaning catalytic
enamelled panels").
A different temperature from the one given in the
recipe was used.
Select the temperature required for the recipe.
The ingredient quantities are different from those
given in the recipe.
Double check the recipe. The addition of more
liquid or more eggs makes a moister mix which
would take longer to cook.
Problem solving guide
89