Changing The Time And Date - Olympus DS-9500 Instructions Manual

Setting time and date [Time & date]

Changing the time and date

If the current time and date is not correct, set it using the procedure below.
1 When the file display screen appears,
press the OK/MENU button while the
voice recorder is in stop mode.
2 Press the + or − button to select [Device
menu] tab.
• You can change the menu display by moving
the settings tab cursor.
[Device menu] tab
Press the OK/MENU or 9 button.
3
Press the + or − button to select
4
[Time & date].
Press the OK/MENU button.
5
• The following steps are the same as Step 1
through Step 3 of "Setting time and date
[Time & date]" (☞ P.14).
Press the F3 (EXIT) button to exit the
6
menu screen.
1
EN
15