Changing The Time And Date - Olympus DS-5500 Instructions Manual

Changing the time and date

If the current time and date is not correct, set it using
the procedure below.
1 While the recorder is in stop mode, press
the OK/MENU button.
2 Press the 9 or 0 button to select
1
[Device Menu] tab.
• You can change the menu display by moving
the settings tab cursor.
3 Press the + or − button to select
[Time & Date].
Device Menu
Power Save
Time & Date
USB Connect
USB Class
12
Reset Settings
Format
BACK
4 Press the OK/MENU button.
• The following steps are the same as Step 1
through Step 3 of "Setting time and date
[Time & Date]" (☞ P.18).
5 Press the F3 (EXIT) button to close the
menu screen.
EN
20
EXIT
Setting time and date