Setting Time And Date [Time & Date] - Olympus DS-9500 Instructions Manual

Setting time and date [Time & date]
If you set the time and date beforehand,
the information when the file is recorded is
automatically stored for each file. Setting the
time and date beforehand enables easier file
management.
1
When you use the recorder for the first time
after purchasing it, or when the battery
has been inserted without the device being
used for a long time, the [Set time & date]
will appear.
However, when a Password has been set
as the device lock function (☞ P.29), the
recorder will go to the time and date set
screen after verification (unlocking).
EN
14
F1, F2, F3 button
OK/MENU button
+, − button
9, 0 button
Press the 9 or 0 button to select
1
the item to set.
Press the + or − button to set.
2
• You can select the order of the "Month",
"Day" and "Year" by pressing the F2 (M/D/Y)
button while setting them.
Press the OK/MENU button to complete
3
the setting.
• The clock will start from the set date and
time. Press the OK/MENU button according
to the time signal.
T I P
• Moving the slide switch to a position other than
STOP (4) while setting the time and date will
cancel the time and date setting. The recorder
will return to the previous time and date.
• You can set the time and date from your PC using
ODMS and DSS Player software (☞ P.46).
Select the item from the
"hour", "minute", "month",
"day" and "year" with a
flashing point.
You can select between
12 and 24 hour display
by pressing the F2 (24H)
button while setting the
hour and minute.