Setting Time And Date [Time & Date] - Olympus DS-2600 Instructions Manual

Setting time and date [Time & date]
If you set the time and date beforehand,
the information when the file is recorded is
automatically stored for each file. Setting the
time and date beforehand enables easier file
management.
When you use the recorder for the first time
after purchasing it, or when the battery
has been inserted without the device being
used for a long time, the [Set time & date]
will appear.
F1, F2, F3 button
OK/MENU button
+, − button
9, 0 button
Press the 9 or 0 button to select
1
the item to set.
Press the + or − button to set.
2
• You can select the order of the "Month",
"Day" and "Year" by pressing the F2 (M/D/Y)
button while setting them.
Press the OK/MENU button to complete
3
the setting.
• The clock will start from the set date and
time. Press the OK/MENU button according
to the time signal.
T I P
• Moving the slide switch to a position other than
STOP (4) while setting the time and date will
cancel the time and date setting. The recorder
will return to the previous time and date.
Select the item from the
"hour", "minute", "month",
"day" and "year" with a
flashing point.
You can select between
12 and 24 hour display
by pressing the F2 (24H)
button while setting the
hour and minute.
1
EN
13