Table of Contents
Advertisement
The module found will be displayed as MAC address in the "Board list".
⑩ Setting
This function is to apply your configurations.
When you select the MAC address from the "Board list", the default value of the module will
be displayed. Modify your configurations and click "Setting" button to apply your settings.
The module will re-initialize and save with your modified configurations.
You can change the configurations by following the steps below:
① Select the MAC address of the device which you would like to modify in the "Board List"
② Modify the settings according to your needs
③ Click the "Setting" button to apply your settings
④ The module will be initialized by a re-booting process
⑤ To verify your settings, please click „Search‟ button and view your new settings
⑪ Upload
Firmware will be uploaded through your network.
The Procedure of Firmware upload is explained details in "Chapter 3. Firmware Upload"
⑫ Exit : Close the configuration tool program window.
WIZ120SR User‟s Manual (WIZnet, Inc.)
8
Advertisement
Table of Contents
